If the screen is blank on the second monitor also, then it could be an issue with the video cable. To do this, you need to find another monitor to connect your computer to. If the cables are connected and you only have one video connection, then you need to rule out bad cables. If you have dual monitors and you connect one to the motherboard and one to the graphics card, then one monitor will end up blank and now you know the reason why. Restarting may fix the problem, but it’ll happen again. If you end up connecting your monitor the motherboard, it might work for a little bit, but suddenly go blank. By default, Windows is supposed to disable the motherboard graphics automatically when you have a separate graphics card, but sometimes this doesn’t happen. If you have a dedicated graphics card, then make sure the monitor is connected to the graphics card and not to the motherboard video connection. For those of you who have more than one video card, you need to be careful how you connect the monitors. Make sure you check the connection at the PC and on the monitor. This is especially true for cables that don’t screw into the back of a monitor. Whether you are using VGA, DVI, HDMI or DisplayPort to connect your computer to your monitor, cables can sometimes become detached. The next easiest thing to do is to check all the cables. If none of that works, try restarting the computer by pressing the power button. Try pressing keys on the keyboard or moving the mouse. If the power is on and everything looks fine, but you’re still not getting anything on your display, the computer may have gone into standby or sleep mode and isn’t being woken up. You will have to reference the PC manufacturer manual to figure out what the beeps or status lights mean. The beeps can also be related to the motherboard, video card, etc. You can read my previous post on how to test your computer for bad memory, which can be one cause for the beeps. If the power button or one of the status lights is red or orange or if the computer beeps several times when turning on, this is indicative of an internal problem. The main thing here is to check for any warning lights or unusual beeps when you power on your computer. Now check to make sure the computer is properly turned on. Try replacing the power supply and see if that fixes the issue. If a separate monitor works fine, then it could mean the power supply is bad on the original monitor. Even with nothing connected, you should be able to bring up the monitor menu. Try connecting a different monitor if you have one. If still you have a blank screen, then this could mean there is a problem with your monitor. If the monitor is on, but nothing is showing up, try to press the menu button to bring up the built-in monitor controls. If the light is on, the monitor is on and you should see some message. Check to make sure the monitor is turned on, which is usually indicated by some kind of light on the power button itself. Your biggest problem will be finding the replacement parts.You’ve probably already done this, but it’s still always worth mentioning because it happens more often than you would think. Honestly I'm not sure why repair shops DON'T do this, as it would be a procedure on which they could have a pretty high profit-margin. But it was relatively quick, easy (though intricate) and saved FAR more money than the mere $15.00 I spent to repair it. Especially when a local repair shop told me they don't do monitors because it's not worth it. I had thought my laptop was dead beyond rescue. It's really not that hard, just be VERY careful to take note of where everything comes apart so you can put it all back together in the right way again.Īnd go to extra lengths to make sure you do not have dust between the glass when reassembling! That is the only mistake I made, and now there are flecks of schmutz on my screen which I cannot get off, because they aren't really ON it, but IN it!Īll said and done, I replaced it with a set of small screwdrivers, a soldering gun, two-hours of my time, and a $15 part from eBay! And it's extended the life of my laptop considerably. I replaced the backlight in my ThinkPad last year some time and it's still going strong. Keep in mind though it MIGHT also be the inverter (probably even easier to fix). If you have the skills (really just basic mechanical and a little soldering), and the patience, repairing the bulb can be quite productive as well as giving you a great sense of accomplishment!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |